Subaru » STI(2008+) » Engine

Subaru STI(2008+)
Engine

Re-circulating Blow-off-Valve. (Fits: Stock TMIC or APS SR375 TMIC 2002-07 WRX, STI) APS 995-047-000

Re-circulating Blow-off-Valve. (Fits: Stock TMIC or APS SR375 TMIC 2002-07 WRX, STI) APS 995-047-000

"The APS re-circulating Blow-off Valve is designed specifically for the Subaru Impreza WRX and STi for use over 600 hp. The APS blow off valve gives you the ultimate in turbocharger durability and improved turbo response particularly during gear changes. A mammoth 1.375"" (34 mm) internal bore size delivers huge capacity and at full piston travel, all ports are fully exposed for maximum blow off volume. Designed to plumb back to the standard entry point which ensures the best driveability during cruise conditions and cures the problems seen with after market external single venting blow off valves. It features a 30 micron hard anodized, T6 billet aluminum body, low friction bronze piston, all stainless steel hardware including spring and Viton 'O' rings."

Please click here, or call 480-596-0500 for shipping info Price: $249.00

"APS ""SR56"" Turbocharger (All WRX 2002-2007)"

This Garrett GT30-37 is the choice for the STI or WRX performance enthusiast who wants the ultimate in engine power. With flow capacity to produce 560 hp at 22psi, this turbo is for the serious street/strip racer. The SR56 is the choice for the performance enthusiast who wants the ultimate in engine power whilst maintaining stock turbocharger orientation. Ideally suited to a heavily modified Subaru engine of 2.2 - 2.5 L capacity. With flow capacity to produce 500 hp at 14.5 psi and 550 hp at 22 psi, this turbocharger is for the serious street/strip racer.

Please click here, or call 480-596-0500 for shipping info Price: $2 250.00

Turbo Inlet Pipe by APS: (Fits All: WRX & STI) APSWRX-CID/01

Turbo Inlet Pipe by APS: (Fits All: WRX & STI) APSWRX-CID/01

The APS Turbocharger Inlet Pipe is precision manufactured in stainless steel. It delivers the maximum possible internal sectional area for the highest turbocharger air flow. The strong pipe walls completely solves the problems of hose collapse (like silicon hose) when under suction at high air flow rates. Includes: Both stock & 3in. turbo Inlet Adpt.

Please click here, or call 480-596-0500 for shipping info Price: $249.00

Moroso Race Oil Pan: EJ25/EJ20

Moroso Race Oil Pan: EJ25/EJ20

Dyno-Comp was instrumental in co-development of this oil pan in conjunction with Moroso engineers.  Designed specifically for road racing and drag racing applications with full baffles and hinged doors.  This oil pan also incorporates a drain-back fitting if you happen to be running a PCV scavenge system that returns oil back to the pan. 

Please click here, or call 480-596-0500 for shipping info Price: $635.00

Cobb Tuning SS Heat Shield

Cobb Tuning SS Heat Shield

The COBB Tuning stainless steel heat shield is in house designed and a replacement for the factory turbo heat shield found on most vehicles. A modification which goes hand in hand with an aftermarket downpipe install, the heat shield prevent the venting of heat cause from exhaust gas temperatures to vent into the engine bay, there by reducing heat soak into key components that benefit from cooler ambient temperature, such as the intercooler. Clearance and fitment as verified to go with most stock or aftermarket downpipes that you may run on the vehicle. Note: Designed for stock turbo applications.
 

Please click here, or call 480-596-0500 for shipping info Price: $50.00

COSWORTH Subaru EJ25 (STI) CNC Ported Big Valve Cylinder heads Pr

COSWORTH Subaru EJ25 (STI) CNC Ported Big Valve Cylinder heads Pr

Cosworth CNC ported cylinder heads feature dyno tested and flow bench proven ports, engineered for maximum real world power. Each new cylinder head is ported on a 5 axis machine to ensure consistency and perfect port shape every time. Additionally, larger intake (+1mm) and exhaust valves (+1mm) are utilized to help increase flow. Cosworth CNC ported Big Valve cylinder heads come complete with a performance valve job, hi rev (max 10,500rpm) valve springs with titanium retainers and are ready to install. Perfect for big turbo applications. Subaru heads are priced for the pair. A flow chart for the head is available by downloading the technical document on the left.

Specification
CNC Ported/machine finished ports - New OE Castings
Hand blended finish work
Intake 22% Increased Flow (max)
Exhaust 41% Increased Flow (max)
4-angle Inlet Valve job
3-angle & radiused Exhaust Valve job
Valves are lapped
Back-Cut Inlet Valves
Heads are Ultra Sonic cleaned prior to assembly
Heads are Serialized and sport a machined Cosworth logo
+1mm Stainless Steel Intake Valves (1800 degrees max.)
+1mm Inconel Exhaust Valves (2400 degrees max.)
Performance Valve Springs
Titanium Retainers
Hardened Steel Spring Platforms
Knife Edge port divider

Please click here, or call 480-596-0500 for shipping info Price: $4 222.00

COSWORTH Subaru EJ20/EJ25 Forged H Beam Connecting Rod Set

COSWORTH Subaru EJ20/EJ25 Forged H Beam Connecting Rod Set

To ensure engine reliability in all conditions, original connecting rods should be replaced with heavy duty specification parts. Complete set of four includes heavy duty SPS rod bolt.

Specification
C to C Length: 5.137"/130.5mm
Weight: 524g

Please click here, or call 480-596-0500 for shipping info Price: $999.00

COSWORTH Subaru EJ25 STI (2.5L) 79mm stroke billet crankshaft

COSWORTH Subaru EJ25 STI (2.5L) 79mm stroke billet crankshaft

Increased engine performance often means increased engine speed and load. Original factory crankshafts may not withstand the added stress resulting in catastrophic engine failure. Additionally, factory Subaru crankshaft rod journals are lubricated from only one main oil feed. Cosworth billet crankshafts feature full-flow oiling whereby each rod journal is lubricated from two main sources. This provides superior lubrication during sustained high rpm use preventing rod bearing failure. Cosworth Subaru crankshafts are manufactured entirely in house from EN40B steel in a light weight-high strength design with a unique Isotropic Superfinish.

Please click here, or call 480-596-0500 for shipping info Price: $3 899.00

COSWORTH Subaru EJ20/EJ25 High Performance Rod Bearing set

COSWORTH Subaru EJ20/EJ25 High Performance Rod Bearing set

Engine bearings are one of the most vital components within an engine and are often overlooked when considering high performance upgrades. Performance engineered, multi-layer bearings generate less heat than normal bearings by reducing friction. Cosworth Race bearing sets feature a unique combination of design, metallurgy and engineering to deliver what drivers expect from high performance Tri-Metal engine bearings.

Specification
High strength overlay plate with reduced thickness for better
Hardened steel backing on all connecting rod
Increased crush and elimination of flash plating
3/4 grooving on Main Bearings providing optimum oil supply
Tight consistent wall tolerances
Oversize chamfers where applicable
Tested to over 1000 horsepower!

Please click here, or call 480-596-0500 for shipping info Price: $69.00

COSWORTH Subaru EJ25 STI Camshaft set- North American Spec 2.5L

COSWORTH Subaru EJ25 STI Camshaft set- North American Spec 2.5L

Cosworth has been engineering camshafts for nearly 50 years. That coupled with years of innovative multi valve cylinder head design ensures our camshaft designs or the most efficient in providing maximum usable power across the widest power band. Each cam is ground from a new chill cast billet and finished using the same procedures we use in our extreme level race engines. Cosworth camshafts are the perfect compliment to our CNC Ported Big Valve Cylinder heads. Our Subaru EJ25 cams are profiled to increase boost response thereby increasing engine torque and power and are fully compatible with the Subaru STI AVCS. Please download the technical document on the left for camshaft specifications.

Specification
Ground from new chill cast billets
North American Spec AVCS compatible

Please click here, or call 480-596-0500 for shipping info Price: $1 049.00

COSWORTH Subaru EJ25 STI Forged Piston Set (99.5mm, 99.7mm and 100mm bore sets)

COSWORTH Subaru EJ25 STI Forged Piston Set (99.5mm, 99.7mm and 100mm bore sets)

The piston is one of the most important components within an engine. It can be subjected to directional change up to 285 times every second and must withstand acceleration forces up to 8500g. Cosworth high performance forged pistons are designed and engineered to withstand this type of punishment and still perform. All Cosworth forged pistons are manufactured using the same methods as our Formula One pistons and feature friction reducing skirt coating, ultra strong pins, polished tops and patented anti-detonation bands. Additionally, each application uses a unique forging to minimize weight and ensure the strongest possible piston design. • Proprietary Cosworth alloy • Popular sizes • Unique forging • Skirt coating • Polished top • Anti-detonation bands • High strength pin

Please click here, or call 480-596-0500 for shipping info Price: $1 199.00

COSWORTH Subaru EJ20/EJ25 High Performance Main Bearing set

COSWORTH Subaru EJ20/EJ25 High Performance Main Bearing set

Engine bearings are one of the most vital components within an engine and are often overlooked when considering high performance upgrades. Performance engineered, multi-layer bearings generate less heat than normal bearings by reducing friction. Cosworth Race bearing sets feature a unique combination of design, metallurgy and engineering to deliver what drivers expect from high performance Trimetal engine bearings.

Specification
High strength overlay plate with reduced thickness for better oil control and less friction
Hardened steel backing on all connecting rod bearings
Increased crush and elimination of flash plating
3/4 grooving on Main Bearings providing optimum oil supply
Tight consistent wall tolerances
Oversize chamfers where applicable
Tested to over 1000 horsepower!

Please click here, or call 480-596-0500 for shipping info Price: $89.00

COSWORTH Subaru EJ20/EJ25 High Performance Cylinder head Stud Kit

COSWORTH Subaru EJ20/EJ25 High Performance Cylinder head Stud Kit

Essential for high performance engine builds, heavy duty head studs reduce cylinder head movement in high boost engines optimizing cylinder head to block sealing. Ultra high performance fasteners are manufactured from high tensile strength steel and come complete with nuts and washers.

Please click here, or call 480-596-0500 for shipping info Price: $297.00

Turbosmart Subaru Dual Port

Turbosmart Subaru Dual Port

Hybrid-type BOV offering three BOVs in one. The Dual Port can be configured to vent to the atmosphere, back into the air intake or both! Plumb Back system for quiet, road-compliant operation, Supersonic for the race track, or Dual Port for the best of both worlds. APPLICATION: Fits Subaru WRX MY01-MY07, STi MY01-08. SUPPLIED WITH: Mounting flange, blanking plug

Please click here, or call 480-596-0500 for shipping info Price: $323.10

Cosworth Front Mount Intercooler

Cosworth Front Mount Intercooler

This bolt on system installs without any cutting or trimming of the vehicle and features large diameter powder coated aluminum tubing and a robust isolated mounting system. Replacing the heat-soak prone top mounted original intercooler increases the potential for performance by providing cooler charge air for the engine. The engineered system features a large, efficient aluminum core with mandrel bent aluminum tubing for maximum performance up to and exceeding 600hp.

Large efficient core in anodized black finish for subtle appearance.
Large diameter mandrel bent aluminum tubing with fine texture gray powder coated finish.
4-ply heavy duty silicone coupling hoses.
Isolated mounting system.
Liner hose clamps.
2.5" Hot side core inlet / 2.75 cold side core inlet.
Compatible with stock air box and cold air inlet duct.
No cutting or trimming of vehicle body required.
Comprehensive instruction manual.
Robust intercooler core mounting system

Please click here, or call 480-596-0500 for shipping info Price: $2 185.00

Subaru High Volume Intake Manifold<br>(Cosworth)

Subaru High Volume Intake Manifold
(Cosworth)

The Cosworth Subaru High Volume Inlet Manifold is cast from aluminum featuring large tapered runners with radiused inlets for improved air flow. Plenum volume has been substantially increased and tuned for power. Engineered for easy installation and is the key to making big power. The Cosworth EJ257 plenum is designed for use with the 2004-2009 STI engines equipped with electronic throttle control. (*The plenum is not designed for use with any cable-actuated throttle body EJ20/25 applications.) This plenum is designed to replace the factory Subaru plenum in vehicles equipped with an aftermarket front-mounted intercooler (FMIC) kit. Throttle body position remains stock, ensuring fitment with any brand FMIC kit designed for the stock throttle body and intake manifold. For 2008-2009 Subaru STI.
(*SPECIAL INTRODUCTORY PRICE)

Please click here, or call 480-596-0500 for shipping info Price: $999.00

Dyno-Comp Blog Dyno-Comp Flickr Dyno-Comp YouTube Dyno-Comp Facebook Dyno-Comp Twitter